제일베어링공업(주)
 
메타컨설팅
 
Leader of the 21st Century

The best of the best,JIB

 
 
 
 
 
HOME > Products
Ball Bearing Unit(GC200)
[JIB] UCP
This is the most basic unit with a choice of hexagonal set screw or eccentric self locking collar for easy shaft mounting. Dynamically and 3-dimensionally designed and developed housing can withstand load from all directions for normal duty service in all types of power transmission and general machinery.
UCP2 : Normal duty
UCPX : Medium duty
UCP3 : Heavy duty
[JIB] UCF
The square housing shape is appropriate for mounting on sides of machinery or for vertical mounting. It is designed to carry the load uniformly on four mounting bolts. It is the most widely used flange shape. Like the pillow style unit, it can reduce operating cost by combining the maximum load carrying capacity with an extended bearing life.
UCF2 : Normal duty
UCFX : Medium duty
UCF3 : Heavy duty
[JIB] UCFS
This A unit has a piloted flange built for heavy duty applications. Two hexagonal set screws on the inner race of the bearing are used to secure the shaft to the bearing. The housing is automatically aligned with the mounting surface by aligning the pilot lip on the mounting side of the flange with the assembly hole of the mounting surface. This unit is best used in situations where accurate alignment is required.
UCFS3 : Heavy duty
[JIB] UCFC
Hexagonal set screw or eccentric self locking collar is used to secure the shaft. This unit can be accurately mounted by aligning the pilot lip on the mounting side of the flange with the assembly hole of the mounting surface. The best product for use in a rotating drums or in cases where eccentric alignment through an assembly hole is possible.
UCFC2 : Normal duty
UCFCX : Medium duty
[JIB] UCFCC
UCFCC2 : Normal duty
[JIB] UCFL
Two hexagonal set screws on the inner race or an eccentric self locking collar is used to secure the shaft to the bearing. The oval shaped housing is mounted with two mounting bolts. The mounting area and the total weight is reduced when compare to the square flange unit. The two mounting bolt hole pitch on the flange is equivalent to the diagonal mounting bolt hole pitch of the square flange for convenient interchangeability.
UCFL2 : Normal duty
UCFLX : Medium duty
UCFL3 : Heavy duty
[JIB] UCT
Hexagonal set screws or eccentric self-locking collar are used to secure the shaft to the unit. The housing is movable along a guide on the side hole of the housing. This unit is best used in situations where adjustment of the axial distance is needed, such as in the belt conveyor tension pulley.
UCT2 : Normal duty
UCTX : Medium duty
UCT3 : Heavy duty
[JIB] UCC
Hexagonal set screws or an eccentric self-locking collar can be used to secure the shaft to the unit. The precision made housing outside diameter is used where control of axial direction is important. The bearing is widely used where thermal expansion and contraction is a problem. The unit shape is identical to the regular bearing shape and can be used as a regular bearing when automatic self-alignment is desired.
UCC2 : Normal duty
UCCX : Medium duty
UCC3 : Heavy duty
[JIB] UCPH
A pillow block unit with high center of axis for use in strong shock loading conditions. This unit is widely used where the distance between the mounting surface and the shaft is large as in printing machines and weaving machines.
UCPH2 : Normal duty
[JIB] UCPA
Pillow style unit designed for applications where mounting area is limited. The housing is mounted with two tapped holes on the base of the unit. This unit is best used for limited mounting areas as in roller conveyor belts.
UCPA2 : Normal duty
[JIB] UCFA
The mounting angle is adjustable along a single point focus for precise adjustment of the shaft location. The mounting bolt pitch is equivalent to the square flange and the oval flange locking blot pitch so that they can be mounted interchangeably.
UCFA2 : Normal duty
[JIB] UCFB
The unit can be locked to the surface with 3 bolts all on one side of the flange. This unit is useful where mounting area is limited or where mounting surface is vertical to the shaft axis.
UCFB2 : Normal duty
[JIB] UCHA
In this unit, one side of the housing has a female rod end for hanging the unit from a pipe assembly. This unit is used in screw conveyors and in situations where compact installation or where middle of the shaft support is needed.
UCHA2 : Normal duty
[JIB] UKP
This design combines the mounting method of the current plummer block and the pillow block. An adapter is used to secure the shaft to the bearing. In addition to regular power transmission use, it is especially appropriate for use on irregular shafts and in the middle of long shafts where accurate rotation is desired.
UKP2 : Normal duty
UKPX : Medium duty
UKP3 : Heavy duty
[JIB] UKF
The bore is tapered for use with an adapter for securing the shaft to the bearing. The housing is easily mounted to the machine surface with 4 mounting bolts. Like the pillow block, this unit is widely used as the middle bearing of a long shaft. Higher reliability is achieved when two securing pins are also used in mounting.
UKF2 : Normal duty
UKFX : Medium duty
UKF3 : Heavy duty
[JIB] UKFS
This unit uses an adapter to secure the shaft to the bearing. Accurate mounting is possible by inserting the pilot lip on the mounting side of the flange into the assembly hole of the mounting surface. This unit is best used in the middle of a long axis or in high rotational speed applications.
UKFS3 : Heavy duty
1 | 2